Yearly Archives: 2016

AEM’s latest release product offering just might save you an engine or two over the course of your boating career. They have just released their Flex Fuel Wideband FAILSAFE Gauges, designed to not only display Air/Fuel Ratio, Boost/Vacuum, and ethanol content, but to also actively protect your engine from any and all damage in the event that it runs lean or excessively rich.

The gauge includes a low side output that triggers a failsafe strategy in the even that the AFR falls outside of your desired operating window. Anyone that uses ethanol based fuels knows how imperative it is to keep the AFR within healthy parameters to keep your engine running at peak performance, and this latest release from AEM give you that much more of an operating cushion.

Read the full details below from AEM’s Official Press Release.

FOR IMMEDIATE RELEASE

AEM Digital Flex Fuel Wideband FAILSAFE Gauge!
One Gauge Monitors Ethanol Content, Air/Fuel Ratios and Manifold Pressure,
Can Prevent Catastrophic Engine Damage

AEM has just released their Flex Fuel Wideband FAILSAFE Gauge (PN 30-4910 w/o Ethanol Content Sensor, PN 30-4911 w/ Ethanol Content Sensor)! It displays Air/Fuel Ratio, Boost/Vacuum and Ethanol Content,

The  2-1/16” Flex Fuel Wideband FAILSAFE Gauge includes a Bosch 4.2LSU AFR wideband sensor for monitoring and feedback of AFR, and an on-board boost sensor to read vacuum or boost pressures up to 29 PSI. It is available with or without an ethanol content sensor for users who may already have one (PN 30-4910 no sensor, PN 30-4911 includes sensor). An internal data logger is included to capture approximately 2.5 hours of data on a loop, and includes two analog outputs for logging AFR, Boost/Vacuum and any triggered alarms.

The gauge also includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window (see example strategies, below).This product is a must have for all tuned performance engines who use Ethanol-based fuels like E85, either forced induction or naturally aspirated. Any high performance vehicle owners who want an accurate AFR tuning tool with integrated logging and the ability save an engine from catastrophic failure will want the Flex Fuel Wideband FAILSAFE device.

VIBRANT Organic LED DISPLAY
AEM’s Flex Fuel Wideband FAILSAFE Gauge’s feature a vibrant Organic LED (OLED) center readout that can be user-programmed to display AFR/Lambda and Ethanol Content, Boost/Vacuum and Ethanol Content, or a single input of either AFR/Lambda or Boost/Vacuum. The 24 sweeping outer LED ‘needles’ can be programmed to display AFR or Boost/Vacuum, and corresponding faceplates are included for matching the inputs to the proper display layout. A silver bezel is also included to further customize the look of the gauge face.

Black Vacuum only in sweeping LEDs
Black and White AFR in sweeping LEDs
Black and White Vacuum/Boost in sweeping LEDs
Black Lambda in sweeping LEDs

WHAT IT DOES
After the engine is tuned and a safe operating window of AFR is established, the Flex Fuel Wideband FAILSAFE Gauge continuously monitors AFR/Lambda and Boost/Vacuum to make sure that AFRs do not fall out of a user defined operating window. If it detects an out of range AFR reading, the gauge triggers a low side output (ground signal with a 1.5 amp draw max) that can save your engine from catastrophic damage (see example strategies, below).

EASY TO SET UP The gauge’s intuitive software makes set up and configuring the low side output a snap. Setting AFR boundary limits, creating a user-adjustable time delay strategy to prevent false alarms, customizing the gauge lighting to flash and alert the driver if an alarm is triggered and configuring the LED displays are all performed using the software via a USB connection.

ON-BOARD DATA LOGGER
The Flex Fuel Wideband FAILSAFE Gauge’s on-board data logger stores approximately 2.5 hours of data (20 Hz per parameter) of AFR, Boost/Vacuum and Alarm events. Data logs can be downloaded for viewing in FREE AEMdata software, which includes video encoding to overlay data onto your videos. Users with AEMnet-equipped (CAN bus) devices can daisy chain the Flex Fuel Wideband FAILSAFE gauge using the AEMnet connection (adapter sold separately). Non AEMnet-equipped devices can communicate with the gauge using the CAN 2.0B spec protocol. An analog output for O2 feedback is also provided for 3rd party engine management systems, or logging with a stand-alone 3rd party data logger.

EXAMPLE ENGINE PROTECTION STRATEGIES
NATURALLY ASPIRATED, TURBOCHARGED OR SUPERCHARGED WITH STAND ALONE EMS OR PIGGYBACK CONTROLLER: Can use the low side output to cut revs, retard timing, trigger a separate fuel or ignition map and activate an ancillary warning light. Users with turbos can also trigger the device to cut boost (may require separate solenoid). The aforementioned strategies are provided as an example. Available failsafe strategies will ultimately be dependent on the capability of the EMS or piggyback engine controller.

WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power and fuel economy, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency.

FLEX FUEL WIDEBAND FAILSAFE GAUGE FEATURES:
-Can display AFR/Lambda, Boost/Vacuum and Ethanol Content simultaneously on the gauge face!
-Internal boost sensor (29 PSI)
-Bosch 4.2LSU Wideband UEGO sensor and weld-in bung included
-Available with or without an ethanol content sensor
-On-Board data logging (AFR & Boost/Vacuum) with analysis using FREE AEMdata software
-Full color center Organic Light Emitting Diode (OLED) display is user selectable (Boost/Vacuum and Ethanol -Content, AFR/Lambda and Ethanol Content or only Boost/Vacuum or AFR/Lambda)
-24 three-color sweeping LEDs, user selectable colors (Boost/Vacuum or AFR/Lambda)
-Intuitive set up software
-Dimmer input included
-Interchangeable faceplates and bezels
-Standard 2-1/16th diameter fits most gauge pods

Twenty-eight year old Korey Sprengel is a phenom, plain and simple. Taking home first place in seven professional tournaments has already set him apart from any other angler in history. And to top it all off, he’s won more money that any professional angler at his age.

Korey started out at the age of 18 and worked his way up to the professional tournaments by 2009 by fishing the WMC with his dad. He continues to fish the WMC every year with a buddy of his and since that first tournament has made more than just a name for himself. He’s built a legacy.

So what does Korey attribute all of his success to? He’s always prepared.

“The biggest reason for winning so early in my career is that I really prepare for each tournament,” he said.  “I don’t know if it’s different from anybody else, but I devote every waking moment so that everything is ready.  I also develop a good game plan.” (www.basspro.com)

That game plan rides heavily on the special propellers, designed and tuned by BBlades, that Korey uses for his boats. In fishing tournaments, speed is paramount top get you to the next spot ahead of the other competitors. Korey chooses BBlades to take care of all of his propeller needs because he understands that their ability to take a stock or specialty prop and tune it to achieve the best possible speed while also improving the handling of whatever boat he’s using is just another key component as to what sets him apart from the competition.

As BBlades and Korey continue to work together to take performance to its peak, the outcome will always reflect the care and dedication of Brett and the BBlades team as they make it their priority to deliver nothing less than perfection time and time again.

Watch the video below to see what Korey himself has to say about BBlades top-of-the-line products and service!

It’s big news when a David vs Goliath type battle comes about. Such as a Manifold vs Header shootout.

Earlier this year at the Miami International boat show, Hardin Marine introduced the new Seaward Exhaust Manifold systems and claimed  they were going to revolutionize the performance exhaust manifold world. We have been waiting not so patiently to see just exactly what all of these claims really meant.

The most significant claim is that this is a true bolt-on to Mercury Racing’s 525/600/700 engines, requiring no cylinder head modifications. No more torturous drilling, tapping, and special jigs trying to adapt an old style exhaust manifold to the engine.

Head of product design and engineering, Jeff Stull, exclaimed that modern tools used to design the product and rapid prototyping equipment gave them insight into areas of product design that just didn’t exist 5 years ago.

Jeff pointed out that Hardin was able to cast a super thick 356T one piece true aluminum tube style header and encase that header in a draw-formed, heat treated, non-porous, billet aluminum jacket. Besides the design features, the real behind-the-scenes story is the corrosion resistance treatments that are state of the art, true Military/OEM spec corrosion protection. This modern evolution of the treatment process shatters the longevity test of everything previously produced by nearly five times. Taking all of this into account, these systems are over $2,200 dollars less than another equivalent header system!!

Jeff again points out that without the veteran team of craftsmen that build and finish many of their over 3000 products, this type of feat wouldn’t have been possible.

But the real meat of this report is just how would the product stand up against an OEM tubular header system? So when a chance to run back to back with a OEM Mercury Racing Header system became available at Goodwin Competitions facility, Hardin Marine jumped at the chance.

Todd Goodwin reports that he was finalizing some turbo charging development work on a freshly rebuilt Mercury Racing 525SCI. Having finished the turbo project they could easily run the systems in a back to back shootout.

Todd’s exact words were pleasantly surprising as we never imagined the manifold system could perform so well. Todd removed the OEM headers and bolted the new Hardin Seaward equipped system on with their matching riser to tailpipe connectors.

The Seaward Performance manifold system performed amazingly, pulling a respectable 529 horsepower at 5400 RPM.  Todd said that while he felt the OEM header system has the ability to outperform a manifold system, the fact that these manifolds performed so well was impressive.

The nearly $2,000 price saving, and the definite reliability advantages of a manifold system are sure to make this a popular option for for many boaters seeking value and reliability.

Congrats to the Hardin Marine Team for another winning product offering.

Hardin-Marine-Dyno-2

For the first time since 2003, the Obama administration has deployed to U.S. aircraft carriers to the the Mediterranean Sea in the hopes of providing much needed firepower and support in the fight against ISIS in Syria and Iraq.

The carriers will support and increase the aircraft that are backing up Iraqi forces attempting to reclaim Fallujah and Mosul, as well as lending aid to the Sunni rebels and Kurdish fighters that are in direct conflict with the Islamic State in northern Syria.

The presence of two carrier strike groups will “support European allies and partners, deter potential threats and are capable of conducting operations in support of the counter-ISIL mission,” Lt. Col. Dave Westover, U.S. European Command spokesman, said in a statement Wednesday. ISIL is an acronym for the Islamic State. (www.foreignpolicy.com)

The USS Harry S. Truman ended a seven-month tour in the Persian Gulf with its arrival in the eastern Mediterranean Friday and has already began hitting targets in Iraq and Syria. According to navy officials, they carrier has already launched 40 sorties and dropped 35 bombs since its arrival . The USS Dwight D. Eisenhower is also joining then Truman where it will aid in combat efforts against ISIS before taking of the Truman’s previous position in the Gulf.

The combination of these two hard hitting carriers is essential in the fight against ISIS and we’ll keep you updated right here on PBN with the progress of the attacks.

Uss_Dwight_D._Eisenhower_(CVN_69)

Orinigal article on www.foreignpolicy.com

The Miami Marine Stadium has seen better days, much better days.

In a bid to finally end the long string of failed restoration plans, Heineken, yes Heineken, has proposed a crowdfunding campaign to revamp the once world famous stadium. According to the director of community outreach for the National Trust for Historic Preservation. Jason Lloyd Clement, the campaign will launch on Indiegogo next month.

“Whoever loves the stadium will be able to give $5 to bring it back to life,” Clement says. “For so long, people have been like, ‘We need to find huge gifts from major donors,’ so this is different in that it’s allowing residents directly to bring it back to life, and that’s something that doesn’t happen with a lot of restoration projects.” (Miami New Times)

Heineken is starting the funding off with a $20,000 donation towards the project and after it is officially approved, the hope is to raise at least $100,000 which will cover the cost of the removal of the dismal seats from the stadium. Although full funding for this project would be a definite step in the right direction, funding to restore the entire stadium is estimated to cost anywhere from $37 million to $40 million and still needs to be addressed.

Don Worth, cofounder of the group Friends of Miami Marine Stadium says, “We’ve always wondered why some corporation hadn’t realized the marketing potential of this place. Heineken did,” he says. “I’d like to think they are going to show the way for some other corporation or philanthropist to realize the incredible naming potential of this place. Once we get a business plan in place, that opens us up to larger forms of financing.” (Miami New Times)

With hopes high and anticipation for the crowdfunding campaign to get underway shortly, things are looking up for the once storied stadium.

 

(Original article and images taken from www.miaminewtimes.com)

We’re only two weeks away from the biggest powerboating event in Texas, the Texas Outlaw Challenge! Nine years running, this year is set to be bigger than ever with more events and parties planned than ever before. So make sure you mark your calendars for June 22nd to the 26th and make your way down to Texas for the party of a lifetime.

Every year people come for miles for the infamous Gunslinger Poker Run that’s home to some of the biggest, craziest high performance powerboats on the water. But don’t get left out if you’re not sporting a high octane vessel. The Pony Express Poker Run is perfect for anyone running with a powerboat under 28 ft. whether it’s a pontoon boat, ski boat, etc… So no matter what, make sure you load up your boat and get in on the action!

TOC15_3033

But what’s an event in Texas without a party!? Join everyone at Kenny Armstrong’s house for a Texas sized “Most Wanted Outlaw” pool party that will leave you already freeing up your calendar for next year. Tons of food, drinks, hot women, a giant pool, and a great atmosphere… what’s not to love? Then when you’re done there ride over to the Galveston Yacht Club for a pool party lunch on Thursday and stake your claim to a FREE “ACE” poker card that will definitely give you the winning edge in the Gunslinger game this weekend.

The fun doesn’t just stop there! After getting your sun on at Kenny’s after the Poker Runs, take the festivities to the streets for the Stampede Street Party where everyone gets a chance to show off there boats before the National Shoot-out. It’s about to be packed so be sure to make it there early and you won’t want to miss the Miss Outlaw Contest to see the hottest girls in Texas competing on the main stage! We urge you to attend with caution because these girls are not for the feint of heart , giving new meaning to the phrase “drop dead gorgeous!”

Finally, there’s what we’ve all been waiting for… the National Shoot-out Championship with a $25,000 cash prize! Limited to seven classes, and only the thirty fastest boats in the entire nation, prepare to be screaming your head off as you watch these monsters tear down the 1- mile radar calibrated course at speeds you can only dream of hitting. No one does it bigger than Texas, and they’ll make sure you walk away with that burned into your memory.

Bring on the Speed! Powerboat Nation will definitely be on site and we can’t wait to see you there.

gone_again_skater_2014_loto_2

(Images taken from http://texasoutlawchallenge.com/)

After winning the Around Long Island race in 1966, I was offered the opportunity to drive a brand new 28’ Donzi that we were building at Donzi Marine, on Thunderboat Row in Miami. Our Detroit area Donzi dealer, George Couzens, had ordered the race boat to publicize his dealership in Mount Clemens, Michigan. It was to be powered by a pair of 620 HP Turbo Daytona Marine 427 c.i. Chevies, and built to a considerably lighter construction schedule than the first four 28’ Donzi race boats. Bill Wishnick owned my previous mount, “Broad Jumper”, one of the original “heavy duty” 28’ Donzi race boats built in 1964. Broad Jumper had won several races in Florida, California and New York. It had also served as a training platform for Bill (and me) to hone our racing skills. Bill was ready to go it alone, and I was ready for a faster ride.

I was a loyal (read: free engines and support) Holman Moody engine racer, and was mildly apprehensive of the powerful, but high-strung, green Daytonas (read: We had to buy them). The new boat was beautiful. It was royal blue with a white deck and bottom. It seemed natural to name it “Blue Devil”, after the #@*&^%*$ Duke University basketball team that had just cost me $300, but that’s another story. It was fast, easily 6 MPH faster than the Holman Moody powered Broad Jumper, but required meticulous throttling to keep the turbochargers turboing, and the pistons pissing.

We carried our favorite fire fighter, Mark “Big Dirty” Raymond, as mechanic, and George as navigator. Both were enthusiastic competitors, and 6’3”, 260 pounds, Big Dirty was especially handy at collecting bets, fending off jealous swains, etc. Our first race together was the 1966 Miami-Key West race. I had finished 2nd in the previous Key West race in the Broad Jumper, and looked forward to winning, as it was one of the few races that I hadn’t yet won (never did). The course was pretty simple. Start in Biscayne Bay, round Fowey Rocks Lighthouse, then keep America on your right.

Offshore racing was growing exponentially, and we had an excellent field for the race. All the local luminaries were there, Bertram, Aronow, Wynne, Genth, Merrick Lewis (Not to be confused with Odell), Langer, Raulerson, Collins, Weiler, Trotter, etc. At the starting flare, we shoved it up (you should pardon the expression) and ran away from the field, leading at Fowey light by several hundred yards.

If George was confused by the next events, one could not blame him. We rounded Fowey Light and headed for next marker, a quarter of a mile ahead of the next boat. I was driving in the center position, with George on my right, and Big Dirty on my left. George was pretty much keeping America on our right, and Big Dirty and I were in a loud discussion about something that had to do with the goings-on in the engine room. Suddenly, I pulled the throttles back, turned off both ignitions, and when the boat slowed to a stop, Big Dirty and I jumped overboard and started tearing up our natty black racing jumpsuits into shreds. What had actually happened, the bronze strut-mounted water pickups under the engines had both snapped off, and the engine room was flooding. There was no way to reach them from inside the boat, so we jumped overboard and tore strips off our clothes to plug up the holes. We discovered that if we unplugged one hole, we could idle with both engines sucking from the small lake in the bilge, and make our way back to the factory. On the way back, we took the Thunderbird/Formula race boat “Super Mother”, crewed by Californians, Peter Rothschild and Bill Cooper, in tow. The “Super Mother” 26’ boat was the latest creation that Don Aronow had stuck Merrick Lewis and Dick Genth of Thunderbird/Formula with. Like many of Aronow’s lady friends, it was really good looking, but it didn’t work. The next race for the “Devil” was a small December race from Miami to Fort Lauderdale and back a couple of times. We led to Fowey Light, which we renamed Fooey! Light, and blew a piston. John Holman offered up a shiny set of Low Riser, Weber carbureted 427 Fords, and we bit. The Fords were a little slower, but they always finished. At last, we had debugged the boat, and had aspirations of some wins. The next two races were in the Bahamas, with the 1967 Gateway Marathon from West Palm Beach to Lucaya and return, which we won, and the inaugural Bahamas 500, from Lucaya to everywhere in the Bahamas and back. The photo at the head of this story was taken from an airplane during the 500, while we were running second behind Dick Bertram. We had broken some fuel tanks, and the bilge was awash with 115/145 avgas. Not good! Big Dirty was a firefighter, and he knew what to do. He taped most of the intake grills, and made the gasoline mixture too rich to ignite, just like ‘flooding’ your car engine. We made it back to Lucaya, 45 miles, and did some serious ground-kissing.

Finally, in the summer of 1967, we arrived at the World’s Fair Marina, on Long Island. Having won the previous Around Long Island race, we were odds-on favorites to repeat, at least until we saw the entire Mercury Marine racing team show up with about thirty race boats. Mercury Racing had superior equipment, and had a support truck worthy of Indy. We had an ex-Florida Power and Light truck, with a case of free Amalie 40-weight oil. Mercury Racing had sucked up all the serious Class One racers except me, and had made all sorts of offers to power my boats as well. We nearly had a deal, but Odell Lewis refused to be my butler. The top dogs on the Mercury team were Odell and Johnny Bakos, both first class racers and first class gentlemen. Johnny Bakos had apparently drawn the short straw, and was assigned to stay with me, no matter where I went on the course.

He was driving a Donzi 008 derivative called “Sternwinder”, which was powered by the first pair of “staggered” Speedmaster drives. About 50 boats answered the starting flare. By the time we reached Coney Island, we were leading, with Bakos just behind. We zoomed past Jones inlet together, and were almost to Shinnecock inlet, when a Coast Guard chopper dropped in front of us with a sign that read: GO BACK. FOG AT MONTAUK. Dang it! Bakos had not slowed, so I didn’t either. Finally, after a couple of miles, we stopped. No one else was visible behind us as we turned and headed back. Imagine the wonder of the rest of the fleet as they saw the growing racing fleet bearing down on them from the front! We finally got them all back to the starting line. We required no repair (that we knew of), so we spent the evening drinking and lying.

The next day was a replay, with the Devil leading to Shinnecock Inlet, where we somehow lost Bakos, and we went on alone, around Montauk Point, through Plum Gut and up the smoother Long Island sound. We were conceding the race to ourselves, when Big Dirty elbowed me and pointed to the port engine’s oil pressure gauge. It was oscillating between zero and 30 or 40 pounds of oil pressure. Bad sign! The Holman Moody Fords had special 18 quart thermostatically controlled oil pans, which had, up to now, never required any thought of adding oil during a race. We slowed the port engine a bit, and got the spare case of oil from the cabin. Big dirty tore off the engine cover over that engine, poured in a couple of quarts of 40 weight oil. The pressure came up immediately. Grazia Dio! No problem. We added a couple more cans for good measure, and noted that we still had forty miles to go. In a few minutes, the oil gauge repeated the problem. We stopped for a look in the bilge. It was eerily quiet in the light fog, and we listened for other race boats, while Big Dirty assayed the situation. Apparently, after our Bahamas 500 debacle, a fiberglass repair on an engine bearer had left a solidified drop of resin in close proximity to one of the two oil filters on the port engine. We had couple of bad landings on the Atlantic side of the course, and had distorted the boat enough to punch a small hole in the oil filter. The bilge was an oily mess, and the filter was hot, at 180F. We did not carry a filter wrench, and could not turn it with a shirt wrapped around it. We started up again “as-is” and headed for the finish line at the Throg’s Neck Bridge. When the gauge hit zero, we dumped in one quart of oil, and made about a mile before it hit zero again. Quick calculation: 15 miles to go, 13 quarts of oil. Uh oh! We ran the starboard engine wide open, and the port engine at half throttle. We were still in the lead, and could see the finish line when Dick Genth caught us, and inched past in his single engine Formula. Our spirits rose when he turned the wrong way at the entrance to the East River, then sank again when he saw us turn the other way. He beat us by 10 seconds (or two quarts of oil). In two years of racing there, the total difference between first and second places was less than 20 seconds. Good racing!

LEGEND MARINE MAKES THE CIGARETTE DIFFERENCE

When a customer buys a high end product, the representation of the product needs to be as good or better than the product itself. Once again CIGARETTE demonstrates the difference when their authorized dealer from Dallas Texas, Legend Marine, delivered yet another spectacular, new CIGARETTE 41GTR, rigged with Quad Mercury Verado 350’s.

This boat is spectacular and the ride, performance, and comfort at speed was incredible.  Powerboat Nation had the privilege of riding along with her new owner the day after she was delivered and get to see first hand how the dealer pays special attention and makes the time to ensure the new owner is ready to enjoy their boat.

Check out the video and photos below to see the ultimate culmination of performance and quality for yourself!

(Dallas Texas. Legend Marine delivered yet another spectacular 41)

Check out all of the latest footage from the Lake Race right here on PBN! Be sure to head to the forums for photos from Pete Boden of Shoot 2 Thrill Pix)!

(Credit – Big Planet Media)

(Credit – OPA Racing)

(Credit – www.fox2now.com)

Alexi Sahagian, master of power and performance, is giving you the keys to the kingdom!

In the latest edition of Boostpower TV, Alexi takes you step-by-step, through the setup of your brand new EFI! Using AEM’s basic Infinity EFI, he takes you through each and every aspect of the program making sure that you have the know-how to perfectly fine tune your new EFI. Get in depth looks from start to finish and walk away with a ability to get to work right away.

With years of experience and a love for all things high performance, this video is absolutely invaluable and even better, it’s for everyone. Whether your neck deep in an engine every day of the week, or your just an enthusiast looking to add a little more power and performance, this video will undoubtedly become part of your boating repertoire for years to come.

Sit back and get your notepad out. It’s time to dive into the world of high performance!